📸 Protect Your Passion with Style!
The ULBTER Tempered Glass Screen Protector for Nikon Z9/Z8 offers unparalleled protection with 9H hardness, ensuring your camera's screen remains scratch-free and clear. Its ultra-thin 0.3mm design guarantees high sensitivity and clarity, while the hydrophobic coating repels sweat and oil. Easy to install and remove, this protector is a must-have for any serious photographer.
Finish Type | Oil Rubbed |
Screen Surface Description | Glossy |
Clarity | 99.99 |
Screen Size | 1 Inches |
Special Features | Anti-Scrach Anti-Fingerprint Anti-Bubble |
Compatible Devices | Nikon Z 9 Camera / Nikon Z 8 Camera |
Item Hardness | 9H |
Unit Count | 1.0 Count |
Number of Items | 2 |
Item Dimensions L x W | 0.04"L x 0.04"W |
Material Type | Tempered Glass |
R**E
Excellent Z8 Screen Protector
Did a little bit of research for a Z8 screen protector and this item got favourable reviews. Took the plunge as at just under £8 for two lots of both rear and upper screen protectors, appeared very reasonable.Came well packaged by the manufacturer and with detailed instructions. It’s a little like fitting a mobile screen protector (but far easier to align)Cleaned and dried the screen with the provided wipes. These are small but more than adequate for the task. Used the supplied guides to hinge the protector in place prior to peeling the backing film. Once ready, peeled off the backing and it fits perfectly without dust particles or bubbles.Identical procedure for top screen. Sits a little proud as some reviews have alluded but really can’t see this being an issue. I can’t see there’s any way to manufacture a screen protector to fit the top in any other manner than slightly proud.Can’t comment on longevity but hopeful it’ll last long enough to prove to be good value.
M**T
Does the job!!
Recently purchased a Nikon Z8 camera. It's not cheap - control panel window and monitor need to be protected. These items do the job very well. Extremely well made and easy to apply. It took me about 30 seconds to apply the glass to the monitor - there was a slight bubble to the bottom left of the monitor - a bit of gentle squeezing and pushing out towards the left edge and the bubble was gone. The control panel was slightly more tricky - but doable. Happy with the result!!
J**T
Easy and highly effective.
Easy to install and all but invisible when in situ.
M**D
Phew!
Bought these for a Nikon Z8 - and, admittedly, approached the installation with some trepidation.All went well. In fact it went swimmingly - but just for balance here are a few notes.There are some 'alignment'(?) stickers in the kit, but the instructions don't indicate what you're supposed to do with them...so I went with the EEVBlog method of sticking my tongue out at the right angle (if you know, you know) and giving it my best shot.The supplied cleaning/drying tissues are incredibly small. They look like courtesy wet-wipes from an Action Man kit. C'mon guys...stick 5p on the price and give us double the size of wipes.The main screen fit is perfect - but the top screen fit stands a bit proud. This is more down to the design of the camera than the protective screen - but I'm not in the least bit worried about that, I'd sooner trade off aesthetics for much beefier screen protection.Having cleaned and dried the screens (with the teeeny-tiny tissues) and positioned them as precisely as I could I was both relieved and delighted to see the screens drop into place and secure themselves with very few air pockets (all on the outer edges) - which were easily remedied by running a fingernail over the screens.The clarity is fine, the touchscreen works perfectly.I hate fitting these things - but I've seen what happens when an unprotected screen cops a whack - so I was very relieved to find that these protectors were easy to install and were a good fit.I'd buy them again...but I'd buy a bigger pack of screen wipes too...It would have been a 5* review...but anyone who's tight with a tissue deserves a point knocking off.
W**S
ULBTER Screen Protector Review for Nikon Z9: Easy Installation and Perfect Fit
As a passionate photographer, I know the importance of protecting my gear, especially my Nikon Z9 camera. So, when I came across the ULBTER Screen Protector, I was eager to give it a try. I'm happy to report that it exceeded my expectations in several ways.Installation Made Easy: One of the first things that impressed me about the ULBTER Screen Protector was how easy it was to install. The package included clear, step-by-step instructions that even a novice like me could follow. Within minutes, I had the protector perfectly aligned on my camera's screen without any annoying bubbles or misalignment issues.Perfect Fit: The ULBTER protector was designed with precision. It fits my Nikon Z9 screen like a glove, leaving no gaps or overhang. This not only enhances the overall aesthetics of my camera but also ensures that the screen is fully protected from scratches, dust, and fingerprints.Crystal Clear Clarity: As a photography enthusiast, I demand crystal clear visuals when composing my shots or reviewing images. The ULBTER Screen Protector does an excellent job of maintaining the clarity and sharpness of my camera's screen. It's almost as if there's nothing there, and it doesn't interfere with the display in any way.Dust-Free: Following the install process and I particularly appreciate that any dust particles are on the outside of the protector, not underneath it. This means I can easily wipe away dust or smudges without having to remove and reapply the protector, which is a huge time-saver during shoots.In conclusion, I can confidently recommend the ULBTER Screen Protector for the Nikon Z9 to fellow photographers. Its easy installation, perfect fit, and crystal clear clarity make it a must-have accessory for anyone looking to protect their camera's screen without compromising on the viewing experience. It's a small investment that goes a long way in safeguarding your valuable gear.Happy shooting, and may your Nikon Z9 stay protected and ready to capture those perfect moments!
J**N
Perfect fit on the Z8 (and so the Z9 too)
Get a few. The first 1 I messed up. The second one, was ALMOST perfect... The 3rd one was pefect! Now I can do them every time. A learning experience. Ignore all the nonsense they come with. Just clean screen with a damp microfibre cloth. And apply accurately by eye, in a way that it does not touch any edges at all using your fingers, wash hands and only touch edges. Once placed it magically applies itself perfectly. If you got it in the right place... Once fitted its impossible to see it. You cannot tell and I tried to scratch one of the ones I screwed up. You cant. Not even sandpaper made a mark! It is like glass. Or it is glass. Forget the one for the top LCD as theres no "recess" and so you can always see that its applied by the edges. If that bothers you.
Trustpilot
1 day ago
1 month ago