N Seat PRO 300 Series Racing Bucket Seat Office Chair Gaming Chair Ergonomic Computer Chair eSports Desk Chair Executive Chair Furniture With Pillows, 360 degrees of rotation, Red

Overall good chair, it is firm which is good if you are working for extended periods, only issue I seem to have, which is more due to height than anything else, the pillow at the top of the chair sits at neck level for me (I am 6 ft.) because if I attempt to slide it up it seems to eventually come loose and fall off. Shipping was fast.Update: I bought this chair back in December and I loved it, however, this week in the middle of a meeting, the seat seemed unbalanced for no reason and I fell backwards. It was not me falling backwards, it was the seat breaking off of the stand (pictures attached). While I understand this can happen after long periods of time, I would not expect this from a gaming or office chair. Considering I use this in my home office which I work out of around 60% of the time. I am disappointed because this chair was to replace a $100 office chair I had gotten from Amazon that had lasted me for four years while I was working and gaming from home around 12 hours a day six days a week.

Update: 2nd chair is off center, feels like I'm leaning to the side. I compared this with other chairs in my house and it definitely isn't me. I cant get the base off the old one to fit it in the box. This has been a nightmare. No more Amazon computer purchases for me.Was OK, felt sort of off center after assembly, I was very careful to put it together correctly, today the back snapped. Broken after 6 months. It was actually the left arm that snapped unexpectedly. Unfortunately the email on their website doesn't work.EVEN WORSE, Amazon said they would replace it and decided to charge the hell out of my checking account without my permission. Can't get a refund for chair #2 and I need the money.

The reviews stating that this char is a serious pain to put together are spot on. It starts off easy with most things just popping into place, and then you have to start attaching the arm rests and the seat/back rest. That's where the real frustrating comes in as most of the holes for screws don't line up well/at all and are just big enough for the screw so you'll find yourself putting a good amount of physical effort into getting everything together. Getting the wheels attached to the base, control arm to the seat, etc took me all of 5-10 minutes. Getting the actual chair part assembled took me a solid hour and a half at least. To be honest I'm a little afraid to be more than gentle with this chair for fear of a screw popping loose on me. Other than that it is a great chair. Quite comfortable, the individual parts are well built so it seems it should last a decent while. I will say the back rest is a bit on the shorter side for what I expected from a racing style chair. I am about 6' 1" and the head rest ends toward the top of my neck, so I can't really lean back properly. That said the top of the chair does kind of support the bottom of my head so I guess it kinda works out. Pillow is useless for me though for those reasons. I'd say this char is the perfect size for a person 5' 10" - 5' 11" or under. Shape of the back rest provides moderate lumbar support so your back shouldn't start hurting after sitting for long periods. Control arms allows for up/down and tilt/no tilt.Tilt will go to about 45 degrees, not willing to test it much further than that to be honest. Does not recline.Arm rest pads are firm but have some give so they are comfortable and the material feels nice on the skin. Does not cause awkward friction like leather would. As you could imagine since the arms are screwed on they are not adjustable.

This is an update to my below review. I have had the chair for about 9 months now and it is a good chair, however there are already tears in the outlying fabric on it. I'm not a heavy guy and I'd have expected it to hold up a lot better. The tears are in a weird location too--lower portion of the seat in the front. It looks like the seams just simply came apart. I'm going to leave it with 3 stars now (down from my previous 5) just due to the comfort level of the chair.Old Review--I have to say this was one of the most frustrating 'put-it-together' products I've ever dealt with. The bolts don't grip into the holes and don't seem to completely match up. Had to do a lot of forcing to get it to cooperate--much more than I would think necessary. Other reviews mention its ease of assembly and so I either got a defective one or simply was not meant to build this particular computer chair (have built several before without issue..). After finally getting it assembled (45 minute process that by the number of steps should have taken 5 to 10 minutes) I sat in it and found the effort to be worth it. This is an initial review and I'll update later if my mind changes, but so far it feels awesome in terms of support and comfort. It'd be cool if it had more adjustments, but honestly I don't think they're needed--it has up/down and tilt/don't tilt. Altogether I love it and think it warrants its price ($150ish for me).

Being a competent DIYer and having made my own furniture I read the reviews and thought I'd be ok putting this togetherDear lordy, were the reviews right. Two of us tried to put it together, there was a lot of swearing and we walked away. After a good nights sleep I returned to it and here's my tip when joining the seat to the back1. attach the armrest to the back on the LHS2. On the RHS, join the arm rest to the seat3. Match up as best you can then lay the chair on the RHS (the arm rest being attached to the chair gives you more stability stopping the back moving out of place too much on the opposite side)4. The LHS is now in a position so you can manoeuvre the holes in the arm rest to the holes in the chair using your knee to help pull them together. Tighten 1st screw just enough to catch so you still have wiggle room when matching the second one. Tighten both screws fully5. Turn the chair over so the LHS is on the floor. RHS facing upwards6. Again using your knees to manoeuvre the back into position. Place screws in. Lightly tighten the first screw, then do the same to the second screw then tighten both fully7. Now put the chair on the baseMake sure you do this on a clear rug/carpet as it does mark easilyA month and a half on and one happy teenager. From a mum's perspective, the chair holds his back in a very good position, much more supportive than the previous office chair with a high back. Chair taking the bashing a distracted gaming teenager has to throw at it. Just one gripe, my son is 5'11" tall and the cushion is too low but he doesn't see it as a problem. Definitely recommend *****

very good chair was easy to put together only took 25mins with 5mm allen key supplied ,some comments said 2 hours witch just cant be right i didnt rush and only 25mins,1 small tip put all screws in 3 or 4 turns before tightening them fully this allows you to move things about easyier till every screw is in

Overall a very good gaming chair, great support and comfortable arm rests. Needs more cushioned padding in the seat and could do with more of a tilt recline but that's easy to deal with considering price.

It was lob sided when I put it together and sent it back the next day.

After using couple of weeks, I can't believe I haven't purchased it sooner! It's very comfortable, even after 3-4 hours sitting. My next purchase will definitely be another N. Seat chair

great seat 10/10

Love it.

French and english reviews/En Français et en AnglaisAssembly/Montage:The chair was quite easy to assemble. Took me 45 to do it alone so we're far from the reviews saying that it took 3hours for three persons. If you take your time ,it'll take the same amount of time that the more expensive alternatives. The trick is to not titghen all the screws and bolts to the maximum until the end.La chaise fut plutôt facile à monter. J'ai pris 45 minutes à la monter, seul donc on est loin des histoire d'horreurs mentionnant avoir pris 3h à 3 personnes. En prenant le temps, en ne serrant pas tous les écrous et vis au maximum du premier coup, tout ira bien.Comfortability/confort:The chair is kinda hard first time you use it. Not really a living room chair so when you put it in front of a computer it'll becomes quite comfortable. More than the one I have at work so I'm pretty happy with the resultLa chaise semble dure au premier essai. Ce n'est évidemment pas une chaise de salon! mais un coup installé devant l'ordinateur elle devient vraiment confortable. Plus confortable que celle que j'ai au travail et j'en suis plutôt satisfait.Durability/Solidité:The chair is pretty solid. Scratched it a bit when doing the assembly, but I was not careful enough at that moment. Just be careful.La chaise est plutôt solide. Je l'ai rayé un brin en faisant l'installation mais c'était à un moment ou je ne faisais pas assez attention.Quite happy with my purchase, I do recommend this economic option!Très content avec mon achat, je recommande cette option économique.

Si, como las otras reseñas dicen sobre la silla se requiere de un poco de trabajo e ingenio ya que las instrucciones y las partes no son exactamente claras a la hora de definic como va cada cosa y me tome dos horas en darme cuenta que parte de la silla habia puesto al revez. A pesar de eso no me arrepiento de haber comprado la silla ya que mi silla pasada tenia algo asi como 20 años y ya era necesario cambiarla. Voy a repetir era NECESARIO Cambiarla.El cuero de la silla parece ser bastante delgado asi que debe tratarse con cuidado.

En caso de medir más de 1.85 (mido 1.90). Esta silla no es el zenit de la comodidad.Si bien es firme y de finos acabados, a un servidor no le permite sentarse las horas que desearía sin sentirse incómodo.El cojín que debería ir en la parte superior llega a mi espalda y me obliga a mantenerme en mala postura no en la "S" ideal que los ergonomistas recomiendan para la columna.

This chair was an absolute living nightmare to work with...To start:-The screws would not properly fit into the poorly shapened holes, causing some screws to slip out and damage the chair during use.-The seat has no tilt and an unfixable height adjustment (will get stuck at highest position when attempting to adjust).-The chair back is poorly positioned, promoting poor posture in the lower back, as well as being too short for anyone above 6 feet in height.-And finally, disassembly is near impossible.The only reason this chair received 2 stars is for the overall 'decent' quality of the fabric of the backing, seat and pillow. Although I paid $160 for the chair, I still do not believe it is worth the money. I believe there are much better value chairs around this price point.

LOVE this gaming chair. It took a bit to put together but it wasn't too challenging with some help, took about an hour to assemble and it's amazing. Very comfortable and my viewers on twitch love it! Makes my stream look more professional. Great quality, colour and moves silently and very easy to roll on the ground. Perfect! I am very happy with this purchase! Great alternative to buying the more expensive gaming racing chairs.

came in with a hole that could not screw in. Amazon offered me a partial discount so its fine. I put a larger and longer screw and it worked just fine. Its a very comfortable chair. Over time, you may have to re-thighten the screws holding the back though. Asside of that, I suggest this product.

chair broke in 2 days. cheap plastic arm rests. back of chair attached to the arm rests so if you a "bigger" person it WILL break. i am not a big person and it broke on me just leaning back in the chair. the plastic holding the back of chair broke. would not recommend

Pros:chair height is above standard chairscomfortable back and tiltseat padding is holding upeasy to put togetherCons:padding on are rests is weak, and doesn't hold up. the place my elbows rest, has already compressed the padding enough, that my elbows rest on the frame....